Thanks to its compacity, the 02C85 pump saves waste during flushing and quick color changes. The fluid section special design combined to GT seals allow priming at very low pressure for a large range of viscosities.
Thanks to its compacity, the 02C85 pump saves waste during flushing and quick color changes. The fluid section special design combined to GT seals allow priming at very low pressure for a large range of viscosities.
Product Status:
Category:
Manufacturer:
Keywords:
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 2 : 1 | |
| Maximum Fluid Pressure | 10 (144.9) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Cylinder | 85 (2.9) | cc (oz) |
| Sound Level | 81 | dBa |
| Fluid Output at 30 cycles/mn | 2.6 (0.7) | l/min (gal/mn) |
| Free Flow Rate | 5.1 (1.3) | l/mn (gal/mn) |
| Air Consumption at 30 cycles/mn at 4 bar (60 psi) | 2.1 (1.2) | m³/h (cfm) |
| Air Inlet | F 3/8" BSP | |
| Fluid Outlet | M 3/8" NPS | |
| Fluid Inlet | M 18x125 | |
| Number of Cycles per liter of products | 12 | |
| Sealing Packing Lower Acetal Resin Seal | ♦ | |
| Sealing Packing Upper GT cartridge with polyethylene packing | ♦ | |
| Height | 41 (16.1) | cm (in) |
| Wetted Parts: Aluminum, Stainless Steel | ♦ | |
| Width | 28 (11) | cm (in) |
| Depth | 17 (6.7) | cm (in) |
| Weight | 5 (11) | kg (lbs) |
| signation | Setup | Atomization air regulator | Air regulator fluid pressure | Additional regulator | Suction rod | Drain rod Ø6x8 | Pump output filter | Part number |
|---|---|---|---|---|---|---|---|---|
| 02C85 BARE PUMP | Standard, Bare | - | - | - | - | - | - | 144941000 |
| 02C85 WALL-MOUNTED | Standard, Wall-Mounted | ♦ | ♦ | - | ♦ | - | - | 151760200 |
| 02C85 SST BARE PUMP | Stainless Steel, Bare | - | - | - | - | - | - | 144940000 |
| 02C85 SST WALL-MOUNTED | Stainless Steel, Wall-Mounted | ♦ | ♦ | - | ♦ | - | - | 151761200 |
| 02C85 SST WALL-MOUNTED + REGULATORS | Stainless Steel, Wall-Mounted | ♦ | ♦ | ♦ | ♦ | - | - | 151761400 |
| Designation | Details | Part number |
|---|---|---|
| Stainless fitting m 1/2 JIC f 3/8 nps | SST Fitting F 3/8 for Electrostatic | 050123306 |
| Kit sst succion rod d.16 w/connector 18x125 + strainer | SST Suction rod with Ø16 hose, strainer and fitting 18x125 | 049596010 |
| Trolley 1 arm | 151730140 |
| Designation | Details | Part number |
|---|---|---|
| MAINTENANCE PACKAGE FOR 350 MOTOR | Seal kit for the air motor | 144850150 |
| SEALS TO KIT FOR HYD 75 | Seal kit for the fluid section | 144941490 |
| SERVICING KIT FOR HYD. 75 | Service kit (Seal kit + Fluid Section components) for the fluid section | 144941495 |
