This paint pump is the perfect pump for Airmix® applications by providing exceptional performance. Recommended for one or two Airmix® gun operations.
This paint pump is the perfect pump for Airmix® applications by providing exceptional performance. Recommended for one or two Airmix® gun operations.
Product Status:
Category:
Manufacturer:
The 10C50 is a 10:1 pump with an 870 psi maximum working pressure.
Fluid Transfer Systems, Inc. (FTS) is an authorized Sames distributor and Authorized Repair & Service Center in Novi, Michigan. Manufacturers in Michigan, Indiana and Ohio call FTS for the Sames 10C50 GT Airmix® Paint Pump. Third-generation family owned since 1971, FTS serves all three states from one location at 22545 Heslip Drive, Novi, MI 48375.
See who to call for paint finishing equipment in Michigan, Indiana and Ohio.
For pricing and availability, call (248) 348-6700 (Monday to Friday, 8 AM to 5 PM Eastern) or request a quote.
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 10/1 | |
| Maximum Fluid Pressure | 60 (870) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Air Consumption | 5.4 (3.2) | m³/h (cfm) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Cylinder | 50 (1.69) | cc (oz) |
| Sound Level | 78 | dBa |
| Recommended Air Pressure | 2 - 5 (29 - 72.5) | bar (psi) |
| Fluid Output at 30 cycles/mn | 1.5 (0.4) | l/min (gal/mn) |
| Fluid Output at 20 cycles/mn | 1.0 (0.26) | l/mn (gal/mn) |
| Fluid Volume per Cycle | 50 | cc |
| Free Flow Rate | 3.0 (0.78) | l/mn (gal/mn) |
| Fluid Output at 15 cycles / mn | 0.75 (0.2) | l/mn (gal/mn) |
| Air Consumption at 30 cycles/mn at 4 bar (60 psi) | 5.4 | m³/h (cfm) |
| Displacement Per Cycle | 50 (3.05) | cc (cubic inch) |
| Motor Type | 250-4 | |
| Air Inlet | F3/8" BSP / F3/8" BSP | |
| Fluid Outlet | F 1/2" NPS / M1/2" JIC | |
| Fluid Inlet | F 1/2" BSP / M26x125 | |
| Number of Cycles per liter of products | 20 | |
| Sealing Packing Upper and Lower GT polyethylene | ♦ | |
| Height | 82 (32.3") | cm (in) |
| Width | 35 (13.8") | cm (in) |
| Depth | 21 (8.3 ") | cm (in) |
| Wetted Parts: Hard Chrome SST, Standard SST, Carbide | ♦ | |
| Weight | 17 (37.5) | kg (lbs) |
| Designation | Version | Fluid inlet | Section rod | Drain rod | Paint filter | Air regulator | Seal | Part number |
|---|---|---|---|---|---|---|---|---|
| 10C50 PUMP WITH FILTER AND SUCTION ROD DIAM 25 | wall | M 26x125 | 25 mm (1'') | ♦ | ♦ | 2 | GT | 151777100 |
| 10C50 PUMP W/O FILTER WITH SUCTION ROD DIAM 25 | wall | M 26x125 | - | - | - | 2 | GT | 151777200 |
| Designation | Part number | ||||
|---|---|---|---|---|---|
| DRAIN ROD D16 S/S CONNECTOR 18X125 | 049596000 | ||||
| TROLLEY 2 ARMS | 051221000 | ||||
| BRACKET W. STRAPS | 056100199 | ||||
| SUCTION ROD DIAM 25 (FITTINGS 26*125) FOR EOS PUMP | 149596150 | ||||
| SUCTION ROD D25 (FITTINGS 26x125) FOR 200 L DRUM | 149596160 | ||||
| GRAVITY HOPPER 6L FOR EOS PUMP | 151140230 | ||||
| TROLLEY 1 ARM | 151730140 |
| Designation | Part number | ||||
|---|---|---|---|---|---|
| SET OF CHEVRON SEALS FOR HYDRAULIC C50 GT | 144950091 | ||||
| SERVICING KIT FOR HYDRAULIC C50 GT | 144950096 | ||||
| SEAL KIT FOR MOTOR 250-4 | 146260991 | ||||
| SERVICING KIT FOR MOTOR 250-4 | 146260996 |
