Binks Pogo Plus series two-ball, double acting piston pumps are low pressure pumps for high volume transfer and application of low to medium viscosity fluids.
Request a quote: Call FTS at (248) 348-6700 or contact FTS for pricing, replacement parts and availability. FTS is an authorized Binks distributor and repair center.
Product Status:
Category:
Manufacturer:
Binks Pogo Plus low pressure pumps are built for high volume fluid transfer and spray applications. These two-ball, double acting piston pumps are available in stainless steel with either PTFE or UHMWE packings and are compatible with a wide variety of materials, including water or solvent borne paints, adhesives and most solvents.
Pogo Plus pumps have a 4:1 ratio and are available with maximum pressure ratings of 290 psi or 500 psi.
Request a quote: Call FTS at (248) 348-6700 or contact FTS for pricing, replacement parts and availability. FTS is an authorized Binks distributor and repair center.
| Part Numbers | 41-28298, 41-28299 |
|---|---|
| Type | Two-ball, double acting piston pump |
| Ratio | 4:1 |
| Max Air Inlet Pressure | 72.5 psi (5 bar) or 116 psi (8 bar) models |
| Max Fluid Pressure | 290 psi (20 bar) or 500 psi (34.5 bar) models |
| Displacement per Cycle | 2.7 oz (81 cc) |
| Theoretical Output @ 60 cycles/min | 1.3 gpm (4.9 L/min) |
| Max Continuous Cycle Rate | 20 cycles/min (40 strokes) |
| Max Intermittent Cycle Rate | 40 cycles/min (60 strokes) |
| Wetted Material | Stainless steel |
| Packings | PTFE or UHMWE |
| Part # | Description |
|---|---|
| PX1304-5P | Pogo pump assembly |
| PX1304-5U | Pogo pump assembly (UHMW, 300 psi) |
| PX1304-8U | Pogo pump assembly |
| PX1304-8P | Pogo pump assembly |
| 98-3062 | Pogo pump outfit |
| 98-3063 | Pogo pump outfit |
| 41-28272 | Air control assembly |
| 41-28331 | Pogo bung adapter kit |
| 0114-016243 | Ground wire kit |
| 41-28347 | Upper guard |
| 41-28348 | Lower guard |
See service manual 77-3040 for complete parts lists and the configuration of each assembly and outfit.
