The Binks 1.5 in. low shear back pressure regulators adjust to control the paint system back pressure within the pipe line and minimizes ‘paint shear’ due to the large surface area of the valve seating.
The Binks 1.5 in. low shear back pressure regulators adjust to control the paint system back pressure within the pipe line and minimizes ‘paint shear’ due to the large surface area of the valve seating.
Product Status:
Category:
Manufacturer:
The Binks 1.5 in. low shear back pressure regulators adjust to control the paint system back pressure within the pipe line and minimizes ‘paint shear’ due to the large surface area of the valve seating.
The ‘back pressure’ regulator responds to the changes in system fluid pressure, (due to variable paint usage) by dynamically adjusting to maintain the set pressure, thus maintaining the required system back pressure.
If the pressure in the system drops below the regulated level (system demand exceeds pump supply rate) then the valve will close down to a minimum.
| Designation | Value |
|---|---|
| Type | Low shear back pressure regulator |
| Port / Size | 1.5 in. |
| Function | Controls paint system back pressure within the pipeline and minimizes paint shear due to large valve seating surface area |
| Response | Dynamically adjusts to maintain set pressure as system fluid pressure changes with variable paint usage |
| Low-pressure behavior | Valve closes down to a minimum if system pressure drops below the regulated level (demand exceeds pump supply) |
